2
1
The router dynamically assigns an IP address to the device in real time. Each time the device is powered
on, the ROUTER randomly assigns an IP address to the device. You can log in to the web page and modify
the IP address based on the IP address assigned by the router. The default device IP address is
192.168.8.8. Click the auto button to switch to this mode. Then the device automatically restarts and
obtains the IP address assigned by the router on the link (this process takes about 30 seconds). After the
new IP address is displayed on the screen of the device, enter the IP address in the browser to log in.
In manual mode, enter the IP address, subnet mask, and gateway, and click the Manual button to switch
to manual mode. Ensure that the IP address of the device is in the same network segment as that of the
LOCAL PC or mobile phone. For example, if the Ethernet IPv4 information of the local PC is IP address:
192.168.1.140 Subnet mask: 255.255.255.0 Default gateway: 192.168.1.1, set the IP address of the local PC
to IP address: 192.168.1.142; Gateway: 192.168.1.1; Subnet mask: 255.255.255.0 The gateway and subnet
mask are the same as those of the local PC or mobile phone.
After filling in the IP address, click the [apply] button below, and then the system willcomplete the modifica-
tion of the IP address and automatically restart the equipment.The network page will also automatically
enter the modified IP address page (there isno need to enter the new IP again). This process takes about 30s.
There are two modes for device IP address setting: DHCP and manual.
1
2
7.1.1 DHCP mode
7.1.2 Manual mode
09