SciCan hydrim c51w, Руководство оператора, Страница: 6 / 59

4. Installation Instructions
Page 4
inlet valves
drain hose
hot water
inlet hose
cold water
inlet hose
The electrical outlet
should not be located
directly behind the unit
and should be accessi-
ble. The powercord must
be routed away from the
back panel and hotwater
inlet hose.
To open the wash chamber door, pull the ring
inside the chemical door.
Tools and supplies required for installation:
• Slot screwdriver • Channellocks
Ensure that HIP Cleaning Solution (instrument wash chemical) is
available. All other supplies are included with the HYDR
IM unit.
Specifications:
Utility Hook-ups
Installation Configurations:
If the HYDR
IM
is installed in a Sterilization Center,
the manufacturer of the Sterilization Center should
allow a 75 mm/3” space at the top, back and both
sides of the HYDR
IM . This will facilitate installation,
leveling, and service access to the HYDR IM .
The cabinetry will need to be vented and allow
the air exhaust from the dryer to escape. At least
75mm/3” of space should be provided behind the
rear panel.
Do not move the HYDR
IM into place by maneuver-
ing the open wash chamber door. This may cause
to door to become misaligned and leak.
* unit will function with water pressure down to 0.5 bar/ 7 psi.
North America Voltage and
Frequency: 208-240V, 60 Hz
International Voltage and
Frequency: 220-240 V, 50 Hz
Rated load: 2 kW
Circuit breaker:
10 A per phase
Height: 475 mm/18.75”
Width: 605 mm/23.8”
Depth: 460 mm/18.25”
Depth with
door open: 780 mm/30.75”
Weight: 34 kg/75 lbs
Running
Noise: 60 dBA
Hose / Length / Max. Distance Water Shut
Cord Diameter Distance from Pressure -off
inlet / drain (optimal)* valve
Hot inlet 1.9 m / 6.2 ft. 1.5 m / 5 ft. 1-10 bar Yes
3/4” 14.5 - 145 psi
Cold Inlet 1.9 m / 6.2 ft. 1.5 m / 5 ft. 1-10 bar Yes
3/4” 14.5 - 145 psi
Drain 1.5 m / 5 ft. — — —
3/4”
Electrical 1.8 m / 6 ft. — — —
AWG 18-3
Option 1. Cabinet / Sterilization Center
Option 2. Sliding Shelf
Option 3. Counter Top