Page 7
AC Sport
Tools Required:
•
3mm Allen Key
•
#2 Phillips Screwdriver
1.
Ensure that the sensor and computer are paired
- see Page 2
2.
Install the silicone seal onto the back of the
Cadence Pro computer then using a 3mm allen
key, secure the IC Pro mount to the back of the
console with three (3) pieces of the M5 x 10mm
button head cap screw.
3.
Remove the clamp screw using a 3mm allen key,
then install the computer/mount assembly onto
the handlebars.
NOTE:
If the mount clamps don’t fi t snugly, use the
included rubber shims to take up the slack.
4.
Once the mount is in place, tighten the clamp
screw using a 3mm allen key to secure it to the
handlebars.