Page 9
AC Performance Plus (Carbon Blue)
Tools Required:
•
3mm Allen Key
•
#2 Phillips Screwdriver
1.
Remove the clamp screw using a 3mm allen key,
then install the computer/mount assembly onto
the handlebars.
NOTE:
If the mount clamps don’t fi t snugly, use the
included rubber shims to take up the slack.
2.
Once the mount is in place, tighten the clamp
screw using a 3mm allen key to secure it to the
handlebars.
3.
Install the RPM sensor onto the chainguard.
NOTE:
DO NOT install the external magnet onto the
AC Performance Plus as it is pre-installed inside the
fl ywheel.