Page 3
5.
To pair automatically, press the Mode button( )
The 4-digit alpha-numeric code should match the
code on the side of the cadence transmitter and
the back of the computer
6.
If needed, a manual pairing can be done by press-
ing and holding the Mode button ( ). The fi rst
digits of the 4 digit code (0000) should be fl ashing.
Adjust the digit using the up ( ) or down
( ) button.
7.
Press the Set button ( ) after each digit has
been paired to the transmitter.
8.
Press the Set button ( ) and select distance in
kilometers (KM) or miles by using the up ( )
or down ( ) button
9.
Press the Set button ( ) to fi nish and begin
exercise.
NOTE:
Once the pairing has been completed, the code
is stored in the on-board memory so that the code is
retained during a battery change, avoiding the need to
re-pair.
