12
13
schwankgroup.com/monsterfans
schwankgroup.com/monsterfans
OWSJ Mount [Open Web Steel Joist]
Wood Truss Mount
1. Insert two 3/8” X 9” long thread rod with welded nut through the studded mounting plate pointing
upward. Place the studded mounting plate against bottom face of OWSJ and place through
bottom web of OWSJ directing the threaded rods between the bottom web angles.
2. Place the other mounting plate over top of the bottom web angles and thread two 3/8” nylock
nuts onto threaded rod with welded nuts.
3. Tighten to sandwich assembly to bottom web of the OWSJ.
4. Continue onto page 20 to complete the fan and drop installation.
1. Place round stand-off on top of flange of fan assembly.
2. Ensure power wire, communication wire and safety cable are directed through either a hole on
side of stand-off ring or up through the centre of the studded mount assembly.
3. Lift motor assembly to bottom of the studded mounting assembly at ceiling and position with
round stand-off on fan assembly so the four ¼” studs are inserted through the clearance holes in
the flange of fan assembly.
4. Thread four ¼” nylock nuts on each of the studs to sandwich fan assembly with round stand-off to
the bottom mounting plate of studded mount assembly.
Installation Procedure
Installation Procedure
