Schwamborn 713564, Перевод оригинальной инструкции по эксплуатации

Страница: 14 / 50

1 Important notes
EN Floor grinding machine DSM 250
14
1 Important notes
The machine may be used only with the accessories
supplied by the manufacturer for stripping, wet and
dry grinding of floor surfaces such as:
— cement
— screeds
— synthetic resin screeds / asphalt
— natural stone floors
— residual adhesive or filling compound
— floor remnants (e.g. foam backing)
Any other use of the machine can lead to dangerous
situations and is prohibited!
To ensure correct use of the machine, follow the in­
structions in the operating instructions, paying partic­
ular attention to any warnings and instructions relat­
ing to operation and maintenance!
Before using the machine, the operat­
ing personnel must carefully read and
understand these operating instruc­
tions!
Keep these operating instructions
close at hand for easy reference!
Read and observe documents and operating instruc­
tions provided by suppliers!
If the machine is on loan to other parties, the operat­
ing instructions needs to be provided with the ma­
chine and its importance must be made clear!
1.1 Symbols used
The following symbols are used in this
documentation:
Safety instructions
This symbol indicates warnings, prohibitions and
instructions regarding potential hazards. These
instructions must be obeyed and closely
observed.
Some safety instructions are accompanied by
corresponding symbols.
Additional information
This symbol indicates additional information.
1.2 Liability and warranty

Schwamborn Gerätebau GmbH
All rights, including those pertaining to translation, lie
with Schwamborn Gerätebau GmbH.
No part of this documentation may be reproduced,
used or distributed in any form without the written
permission of Schwamborn Gerätebau GmbH.
Liability or warranty is excluded if:
— The instructions in the operating manual
have not been observed.
— The machine or its attachments were im­
properly operated.
— The maintenance was carried out inade­
quately or incorrectly.
— Specified spare parts were not used.
— The protective equipment was not used,
has been altered or was removed.
— The specified power supply ratings and
surrounding conditions have not been ob­
served.
— Unsuitable tools have been used.
— An unsuitable dust extraction has been
used.
The manufacturer is not liable for any damage that
may result if the user makes any changes to the ma­
chine without the manufacturer’s permission. Any
such actions will void the warranty.
2 Safety
This chapter contains a summary of the most impor­
tant information on safety when handling the ma­
chine.
2.1 Accident prevention and safety
The following instructions comply with legislation, di­
rectives and publications such as:
— EU Machinery Directive
— EU Product Liability Directive
— Law governing technical materials
— Law governing equipment safety
— Law governing product liability
These operating instructions are intended for opera­
tors and tool setters, as well as for the personnel that
service, maintain and repair the machine. Together
with all the technical documentation, it is intended to
help
— avoid hazardous situations
— use the machine for its intended applications
— avoid downtime and repair costs
— maintain the function of the machine
— extend the service life of the machine.
Warning Prohibition
Direction