schwa-medico
EMP 4 PRO
8
Battery level
The battery symbol on the display indicates the battery level. A completely charged
battery shows all bars in the symbol. The fewer the bar symbols, the lower the battery
charge level.
Recharging the battery
The battery must be recharged if the battery display indicates empty.
• Switch off the device.
• Ensure that the battery is in its compartment, correctly inserted and the compartment
closed.
• Connect the mains adapter to the socket in the centre of the upper part of the device
(number 8).
• Connect the mains adapter to the mains circuit.
• The display shows an increasing number of bars. The charging time lasts up to 3
hours. The charger stops automatically once the battery is fully charged.
• To check if the battery is fully charged, disconnect the device from the mains adapter
and switch on the device. The battery indicator on the top left side of the screen
displays the battery level.
Switching ON the EMP 4 PRO
Press the key to start the device (number 6).
The program shown on the display is the last program used.
The device automatically switches OFF after 2 minutes of disuse.
Connecting the cables and the electrodes
• Connect the electrodes with the cable(s) (always 2 electrodes per cable).
• Connect the cables to the EMP 4 PRO on socket no. 9.
• Place the electrodes on the desired area (see electrode placement).
Selecting a program
Select a program by pressing the
P
key. To scroll through the programs, press the
P
key
as often as necessary until you have selected the program of your choice. To return to the
previous program, press the
▼
key of channel 1 (far left side).
