schwa-medico
EMP 4 PRO
7
Display of electrical current form
Stimulation pause
Stimulation rising ramp
Stimulation work phase
Stimulation falling ramp
Biphasic asymmetric impulse
Biphasic symmetric impulse
Biphasic symmetric impulse with pause
Operating the EMP 4 PRO
Power mode
You can use the device directly from the 220 Volt mains or with the rechargeable battery
in the device.
Using the 220-Volt mains adapter
• Connect the cable to the central supply socket on the front face of the device between
the channel outlets 2 and 3 (number 8).
• Connect the mains adapter to your mains circuit socket.
The device operates from the mains supply whether or not a rechargeable battery has
been inserted.
Using the battery
New devices:
The battery is already inserted in new devices. Please fully charge the battery before first
use of the EMP 4 PRO.
Otherwise:
Open the battery compartment, plug the battery into the connector inside the compartment
(upside right), place the battery in the compartment, close the compartment. The device is
ready for battery mode operations. The mains power adapter is only necessary to recharge
the battery.
