SCHUNK WSG 25, Сборка и руководство по эксплуатации, Страница: 8 / 56

Basic safety notes
8
05.00 | WSG 25 | Assembly and Operating Manual | en | 389684
2.4 Special standards
The following standards are met:
• Fast transients on supply and I/O lines (burst) to IEC / EN
61000-4-4
• HF power supply to IEC/EN 61000-4-6
• HF radiation according to IEC/EN 61000-4-3
• Emissions according to EN 55011:2009 Class A (corresponds to
EN 61000-6-4:2007)
• Magnetic field with energy technical frequency according to EN
61000-4-8
2.5 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
2.6 Gripper fingers
Requirements for the gripper fingers
Stored energy within the product creates the risk of serious
injuries and significant property damage.
• Arrange the gripper fingers in a way that the product reaches
either the position "open" or "closed" in a de-energized state.
• Only exchange the gripper fingers when no residual energy
remains in the product.
• Make sure that the product and the top jaws are a sufficient
size for the application.
2.7 Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
• Make sure that the product is used only in the context of its
defined application parameters, Technical data [ } 13].
• Observe Maintenance intervals, Maintenance and cleaning
[
}
50].
• Make sure that the environment is clean and the ambient
temperature corresponds to the specifications per the catalog.