Assembly
26
01.00|NSL mikro 50-13 1425873|en
The clamping pins can be attached to the workpiece or pallet in
two different ways.
Preference should be given to the left mounting option in the
illustration "Mounting the clamping pins". With this variant, if
there is a module failure then the device or pallet can be removed
after disassembling the clamping pins.
Mounting the clamping pins
Tolerances and installation conditions
Type
ID
A
B
C
D
E
F
G*
SPA mikro
10
0436610 > 5 mm > 8 mm M4 > 5 mm > 6 mm M3 5 mm
SPB mikro
10
0436620 > 5 mm > 8 mm M4 > 5 mm > 6 mm M3 5 mm
SPC mikro 10 0436630 > 5 mm > 8 mm M4 > 5 mm > 6 mm M3 5 mm
* The length of the inserted thread must not be lower than
the "G" dimension!
