SCHUNK VERO-S NSL mikro 50-13, Перевод оригинального руководства по эксплуатации

Страница: 9 / 37

Basic safety notes
01.00|NSL mikro 50-13 1425873|en 9
Intended use
This product is intended solely for positioning and clamping
workpieces or clamping pallets on machine tools or other suitable
technical devices.
• The product may only be used within the scope of its technical
data, (

3, Page 17) .
• The product is intended for industrial and industry-oriented
use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
Not intended use
The product is not being used as intended if, for example:
• It is used as a pressing tool, a toolholder, a load-handling device
or as lifting equipment.
• It is used for a turning application.
• It is used in working environments that are not permissible.
(

2.6, Page 10)
• The technical data is exceeded during use.
(

3, Page 17)
Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.
2.2
2.3
2.4
2.5