Basic safety notes
10
01.00|NSL mikro 50-13 1425873|en
Environmental and operating conditions
Required ambient conditions and operating conditions
Incorrect ambient and operating conditions can make the product
unsafe, leading to the risk of serious injuries, considerable material
damage and/or a significant reduction to the product's life span.
•
Make sure that the product is used only in the context of its
defined application parameters,
•
Make sure that the product is a sufficient size for the
application.
•
Make sure that the contact surfaces of the interface are always
clean.
•
Make absolutely sure that no chips of any kind can enter the
interface and that the interface does not fill with cooling
emulsion, which is particularly possible with vertical alignment
of the clamping pin axis. The best way to ensure neither of
these occur is to use the SDE mikro protection covers. If the
interface should fill with cooling emulsion, initiate the
unlocking process and dry out the interface in actuated state.
•
Only use high-quality cooling emulsions with anti-corrosive
additives during processing.
Personal protective equipment
Use of personal protective equipment
Personal protective equipment serves to protect staff against
danger which may interfere with their health or safety at work.
•
When working on and with the product, observe the
occupational health and safety regulations and wear the
required personal protective equipment.
•
Observe the valid safety and accident prevention regulations.
•
Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
•
Wear heat-resistant protective gloves when handling hot
surfaces.
•
Wear protective gloves and safety goggles when handling
hazardous substances.
•
Wear close-fitting protective clothing and also wear long hair in
a hairnet when dealing with moving components.
2.6
2.7
