SCHUNK VERO-S NSE-T3 138, Сборка и руководство по эксплуатации

Страница: 27 / 60

Assembly
03.00|1152197 NSE3, NSE-T3 |en
27
NSE3 138-V1, NSE3 138-V1-K, NSE3 138-V4, NSE3 138-V4-K
Fastening in the installation space with 6 M8 screws.
The assembly module can be positioned by means of two
centering diameters of the installation space:
Ø 110 H6 in the lower range. For partial and full installation.
Ø 138 H6 in the upper range.
The exact position orientation is done with a fitting screw with a
diameter of Ø 9 f7 x 5 mm. Precise alignment and positioning of
the quick-change pallet system requires that the fitting bore Ø 9
H7 on the opposite side is precisely positioned in the mounting
position.
The air connection is normally made via the bottom coupling holes
in the floor of the unit.
4.3.2