Hand Crimp Tool for Krimptite
/ VersaKrimp
Terminals
Doc No: ATS-640160038
Release Date: 06-27-12
UNCONTROLLED COPY
Page 1 of 5
Revision: A
Revision Date: 06-27-12
ServiceGrade
Hand Crimp Tool
Application Tooling
Specification Sheet
Order No. 64016-0038
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
For crimps conforming to industry standards such as UL, USCAR21, and WHMA-IPCA620 Class 2,
please use the 64003-0100 Premium Grade™ hand tool for the Molex terminal
SCOPE
Products: Krimptite
/ VersaKrimp
Quick Disconnects, Rings, Spades, Hooks, Block, and Flanged Spades, Butt
and Parallel Splices, 10 - 22 AWG.
Crimping Information:
Crimp the terminal and appropriate gauge wire in the specified profile.
Description
Wire Size
Pull Force Min.
▼
Tool Crimp Profile
Markings
AWG mm
2
N
Lb.
22-18 16-14 12-10
Terminals
(Quick Disconnect,
rings, spades, hooks,
block spades, or
flanged spades)
10
5.00
356.0
80.0
X
12
3.30
311.5
70.0
X
14
2.00
222.6
50.0
X
16
1.30
133.5
30.0
X
18
0.80
89.0
20.0
X
20
0.50
57.9
13.0
X
22
0.35
35.6
8.0
X
Splices
(Butt splices or
parallel splices)
10
5.00
178.0
40.00
X
12
3.30
155.7
35.00
X
14
2.00
111.2
25.00
X
16
1.30
66.8
15.00
X
18
0.80
44.5
10.00
X
20
0.50
44.5
10.00
X
22
0.35
35.6
8.0
X
▼
Pull force test samples should not have the wire insulation crimped.
Note:
An occasional, destructive, pull force test with the terminal and wire crimped should be performed to check hand tool
crimp. The pull force value must exceed the terminal’s minimum pull force specifications listed above. If values do
not exceed the minimum pull force when all instructions are followed then a new tool is required.
