SCHUNK VERO-S NSE-T3 138, Сборка и руководство по эксплуатации

Страница: 22 / 60

Assembly
22 03.00|1152197 NSE3, NSE-T3 |en
WARNING
Risk of injury due to unexpected movements when installing
and removing the cone seal!
This can cause components to move unexpectedly when working
on the cone seal, resulting in injuries.
• Before starting all work on the product, refer to the cone seal
chapter. (

4.3.6, Page 37)
• Make sure that components of the gate unit are fitted in
accordance with the installation guidelines and safely locked
in place.
CAUTION
Danger of injury due to sharp edges and rough or slippery
surfaces
• Wear personal protective equipment, particularly protective
gloves.
1 Check the flatness of the bolting surface.
(

4.3, Page 23) .
2 Screw the module with inserted O-rings onto the clamping
station.

Observe permissible tightening torques for the mounting
screws and the strength class.
(

4.7, Page 44) .
3 Connect module.
(

4.3, Page 23)

via the hose-free direction connection in the base of the
quick-change pallet module, OR

via supply lines on the side G1/8" connections (only possible
for NSE3 138 /-V1 /-V4 / -P /-K)
– unscrew locking screws G1/8"
– screw in air connections.
4 If necessary, connect monitoring functions.