Maintenance and care
7 Maintenance and care
DANGER
Danger to life in case of improper disassembly. The cylinder
piston and the cover are under tremendous spring force, which
can eject the parts.
•
Any work requiring disassembly of the cover or cylinder piston
may only be performed by SCHUNK.
•
For basic cleaning, only the base jaws with their attachments,
as well as the chuck piston and the cover strip may be
dismantled.
7.1 Notes
Original spare parts
Only use original spare parts from SCHUNK when replacing
wearing parts/spare parts.
Replacement of the housing and base jaws
The base jaws and the guides in the housing are matched to each
other. To replace these parts, send the entire product to SCHUNK
with a repair order.
7.2 Maintenance and lubrication intervals
The following maintenance work should be carried out after the
specified cycle numbers or, at the latest, according to the monthly
data.
Maintenance work
Interval [cycles/month]
Lubrication
10,000 / 1
Basic cleaning (exclusively by
SCHUNK)
- / 12
Leak test
5,000 / 1
29
05.00 | KSF3, KSF3-LH, KSF3-F | TANDEM Clamping Force Block | en | 1467140
