SCHUNK TANDEM KSF3 100-Z, Сборка и руководство по эксплуатации

Страница: 31 / 52

Maintenance and care
Manual lubrication
• Press grease either into the grease nipples at
the side or front of the respective supply line
(6/7).
• Only lubricate in the open position.
• After greasing, run through the complete
stroke several times.
• Grease to be used and lubrication
intervals.
}
7.3 [
/
30]
Size Grease quantity (strokes per grease nipple)
64 1
100 2
140 2
160 2
200 2
250 3
315 4
Central lubrication
• To use central lubrication, the set-screws of
the factory sealed connections (6, 7) must be
removed.
• For proper lubrication, both supply lines
must be connected.
• The central lubrication system must be
suitable for greases of NLGI 2 classification.
• Only lubricate in the open position.
• After greasing, run through the complete
stroke several times.
• Grease to be used and lubrication
intervals,
}
7.3 [
/
30]
Size Grease quantity (per connection) [cm³]
64 2
100 4
140 4
160 4
200 4
250 4
315 6
31 05.00 | KSF3, KSF3-LH, KSF3-F | TANDEM Clamping Force Block | en | 1467140