SCHUNK TANDEM KSF3 100-Z, Сборка и руководство по эксплуатации

Страница: 28 / 52

Troubleshooting
28 05.00 | KSF3, KSF3-LH, KSF3-F | TANDEM Clamping Force Block | en | 1467140
Clamping force block movement jerky
Possible cause Solution(s)
Steel guide rollers on sliding surfaces
not greased See chapter "Maintenance and Care"
}
7 [
/
29]
The monitoring piece in a base jaw is
pressed too tightly against the housing Loosen the adjustment screws and readjust the
monitoring piece
} 7 [
/
29]
Monitoring functions of the jaw stroke positions do not work
properly
Possible cause Solution(s)
Monitoring pieces in the base jaws not
positioned exactly Readjust monitoring piece for the required
function
}
7 [
/
29]
Pressure change due to clamping
stroke too low Adjust clamping stroke to the workpiece to >0.3
mm/jaw
Seals damaged Replace seals in cover and adapter
plate
} 8.1 [
/
37]