Maintenance and care
30
05.00 | KSF3, KSF3-LH, KSF3-F | TANDEM Clamping Force Block | en | 1467140
7.3 Greasing areas / lubricants
Greasing areas
Lubricant
Sliding surfaces body – base
jaw
microGLEIT LP 410
Sliding surfaces base jaw -
chuck piston
microGLEIT LP 410
Lubrication nipple
microGLEIT LP 410
Central lubrication
microGLEIT LP 410
All seals
RENOLIT HLT 2
Sliding surfaces cylinder piston-
housing
RENOLIT HLT 2
(Product information about microGLEIT LP 410 can be requested
from SCHUNK).
Alternative lubricant
LINOMAX plus can also be used as an alternative to microGLEIT LP
410. The specified clamping forces are however based exclusively
on microGLEIT LP 410 as used by SCHUNK.
When using LINOMAX plus, the clamping forces can be lower.
7.4 Maintenance work
7.4.1 Lubrication
CAUTION
Allergic reactions or irritation due to skin or eye contact with
lubricants on the product.
•
In case of foreseeable contact with lubricants on the product
(e.g. when lubricating or cleaning), wear protective equipment
(protective gloves, protective goggles).
To maintain reliable function and high quality of the product, it has
to be regularly lubricated. This can be done with a hand lever press
for greases or by means of central lubrication.
