Assembly and Operating Manual
Quick-Change-System type SWS-I-011
6
Date printed 28.02.11
5
Assembly and Installation
5.1 Assembly
CAUTION !
-
Switch off the power supply during installation of the quick-change system.
-
Comply with the safety instructions in Chapter 1.3, page 3.
-
Always install the SWK-I-011 with an adapter plate!
Fasting of the Quick-Change-Adaptor (SWA-I-011)
-
Fasten the quick-change adapter SWA-I-011 with M3 screws.
Fasting of the Quick-Change-Head (SWK-I-011)
You can fasten the Quick-Change-Head SWK-I-011 with the screws which you will find in the
enclosed little plastic bag.
-
For centering purposes, please use the cylinder pin out of the plastic bag.
Type SWK-I
011
/1/
Fastening screws DIN EN ISO 4762
M3 x 22
/2/
Cylinder pin for centering DIN 6325
3m6 x 12
Table 1: Overview of screws and cylinder pins for SWK-I-011
Figure 1: Mounting of SWK-I-011
www.comoso.com
