SCHUNK SVP-2, Сборка и руководство по эксплуатации

Страница: 7 / 32

Basic safety notes
03.00 | Clamping Device SVP-2 | Assembly and Operting Manual | en | 0289021
7
2 Basic safety notes
2.1 Intended use
The clamping device has been designed to equip and replace tools
in TRIBOS toolholders.
TRIBOS toolholders are suitable to clamp rotationally symmetric
tools or work pieces. With shank tools, all shanks can be clamped
according to DIN 1835 Form A, B, E or DIN 6535 Form HA, HB, HE
(shank tolerance h6).
The polygon clamping system (clamping device, reduction inserts
and TRIBOS toolholders) may only be used within the framework
of its defined application parameters
Technical data [ } 11].
• The product is intended for industrial and industry-oriented use.
• Appropriate use of the product includes compliance with all
instructions in this manual.
2.2 Not intended use
It is an not intended use of the clamping device if toolholders were
used that are not SCHUNK TRIBOS toolholders.
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written
approval of SCHUNK.
2.4 Spare parts
Use of unauthorized spare parts
Using unauthorized spare parts can endanger personnel and
damage the product or cause it to malfunction.
• Use only original spare parts or spares authorized by SCHUNK.