Basic safety notes
10
03.00 | Clamping Device SVP-2 | Assembly and Operting Manual | en | 0289021
CAUTION
Material damage due to wear of the reduction insert.
Too high wear of the reduction insert causes loss of function of
the toolholder.
The wear of the reduction insert may be maximum of 0.04 mm.
•
When exceeding the maximum wear replace reduction insert.
CAUTION
Material damage due to exceeding the permissible pressure!
Too high pressure causes deformation of the toolholder and loss
of function.
•
Observe the pressure specifications of the toolholder.
CAUTION
Material damage due to false minimum clamping depth!
A too low minimum clamping depth causes loss of accuracy and
torque at the toolholder.
•
Observe minimum clamping depth of the tool,
✓
See Assembly and Operating manual Toolholder.
