Troubleshooting
22
03.00 | Clamping Device SVP-2 | Assembly and Operting Manual | en | 0289021
7.2 Tool shank can only be partially inserted into the toolholder
Possible cause
Corrective action
Toolholder has not fully engaged with the
engaging areas of the reduction insert.
Engage toolholder properly.
Reduction insert not inserted up to the
stop into intermediate sleeve of the
clamping device.
Insert reduction insert up to the stop into the
intermediate sleeve of the clamping device.
Bad quality of tool shank e.g. it may have
a slightly conical shape.
Check tool shank.
Use tool shank with tolerance h6.
