SCHUNK SRH-plus-D, Сборка и руководство по эксплуатации

Страница: 37 / 56

Maintenance
Interval [Mio. cycles]
for
SRH-plus-D 50 - 60
Maintenance work
1 Clean all parts thoroughly, check for damage
and wear, if necessary replace seals and
wearing parts,
} 7.7 [
/
41] .
1 Treat all grease areas with lubricant,
} 7.3 [
/
37] .
1 Check that the shock absorbers are working,
if necessary replace shock absorber
} 7.6 [ / 40]
7.3 Lubricants/Lubrication points (basic lubrication)
WARNING
Risk of injury due to contact with lubricants!
Lubricant may cause irritation and allergic reactions if it contacts
the skin or eyes.
•
Avoid contact between lubricant and skin or eyes.
•
Wear safety goggles and protective gloves.
•
Observe information on the safety data sheet of the lubricant.
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point Lubricant
The teeth and the pinion Toothgood 1
All seals Sealgood 1
7.4 Inspect and set shock absorbers
7.4.1 Inspect shock absorbers
The shock absorbers are specially tested and can only be acquired
from SCHUNK. The shock absorbers have a limited lifespan,
depending on the load.
•
Regulary check that the shock absorbers are working.
✓
The shock absorber is working correctly if the product
moves softly into the end positions when set correctly and
the prescribed swiveling time is reached.
37 03.00 | SRH-plus-D | Assembly and Operating Manual | en | 1424337