SCHUNK SRH-plus-D Скачать руководство пользователя | Manualshive

Страница: 12 / 56

background image

Basic safety notes

12

03.00 | SRH-plus-D | Assembly and Operating Manual | en | 1424337

2.10 Malfunctions

Behavior in case of malfunctions

• Immediately remove the product from operation and report the

malfunction to the responsible departments/persons.

• Order appropriately trained personnel to rectify the

malfunction.

• Do not recommission the product until the malfunction has

been rectified.

• Test the product after a malfunction to establish whether it still

functions properly and no increased risks have arisen.

2.11 Disposal

Handling of disposal

The incorrect handling of disposal may impair the product's safety
and cause serious injuries as well as considerable material and
environmental harm.
• Follow local regulations on dispatching product components for

recycling or proper disposal.

2.12 Fundamental dangers

General

• Observe safety distances.
• Never deactivate safety devices.
• Before commissioning the product, take appropriate protective

measures to secure the danger zone.

• Disconnect power sources before installation, modification,

maintenance, or calibration. Ensure that no residual energy
remains in the system.

• If the energy supply is connected, do not move any parts by

hand.

• Do not reach into the open mechanism or movement area of

the product during operation.

2.12.1 Protection during handling and assembly

Incorrect handling and assembly

Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
• Have all work carried out by appropriately qualified personnel.
• For all work, secure the product against accidental operation.
• Observe the relevant accident prevention rules.
• Use suitable assembly and transport equipment and take

precautions to prevent jamming and crushing.

«
...
10
11
12
13
14
...
»

Содержание SRH-plus-D

























































Отзывы:

Нет отзывов

Похожие инструкции для SRH-plus-D

Бренд: Keithley Страницы: 67

Бренд: Keithley Страницы: 23

Бренд: Keithley Страницы: 93

Бренд: Oki Страницы: 44

Бренд: Magnescale Страницы: 64

Бренд: Facsimile Страницы: 16

Бренд: Garmin Страницы: 2

Бренд: Latham Страницы: 4

Бренд: SafeWaze Страницы: 23

Бренд: Labnet Страницы: 12

Бренд: Mach Страницы: 12

Бренд: M-Audio Страницы: 3

Бренд: Xtralis Страницы: 26

PowerGen 5650 Series

Бренд: Qnergy Страницы: 10

Бренд: Park House Healthcare Страницы: 32

Бренд: B. Braun Страницы: 40

Бренд: B. Braun Страницы: 4

Бренд: Calibre Fitness Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды