manualshive.com logo in svg

SCHUNK SRH-plus-D, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRH-plus-D Скачать руководство пользователя страница 15

Basic safety notes

 WARNING

Risk of injury from sharp edges and corners!

Sharp edges and corners can cause cuts.

•

Use suitable protective equipment.

 WARNING

Risk of burns through contact with hot surfaces!

Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.

•

For all work in the vicinity of hot surfaces, wear safety gloves.

•

Before carrying out any work, make sure that all surfaces have
cooled down to the ambient temperature.

 WARNING

Risk of injury from parts coming loose!

If the shock absorbers are faulty, the product can become
damaged. Parts coming loose in this way can lead to injuries.

•

Regularly check the components for wear and damage.

 WARNING

Risk of injury if the condition or behavior of the product is
undefined!

Cutting off the compressed air supply in an uncontrolled manner
could lead to undefined states and behavior. This may cause
personal injury or material damage.

•

The operator must define suitable emergency stop and
restarting strategies.

✓

Emergency stop strategies: e.g. by means of controlled shut
down

✓

Restarting strategies: e.g. using pressure build-up valves or
suitable valve switching sequences

15

03.00 | SRH-plus-D | Assembly and Operating Manual | en | 1424337

Содержание SRH-plus-D

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды