SCHUNK SFL 25 Series, Сборка и руководство по эксплуатации

Страница: 31 / 44

Troubleshooting
05.00 | SFL | Assembly and operating manual | en | 389398
31
6.4 The product is swivelling abruptly
Possible cause Corrective action
Too little grease in the mechanical guiding
areas. Clean and lubricate product.
Maintenance [ } 32]
Compressed air lines blocked. Check compressed air lines for damage
6.5 The product is not moving
Possible cause Corrective action
Pressure drops below minimum. Check air supply.
Pneumatic connection [
}
21]
Compressed air lines switched. Check compressed air lines.
Unused air connections open. Close unused air connections.
Pneumatic connection [ } 21]
Both exhaust air throttle valves are closed. Open one exhaust air throttle valve.
Proximity switch defective or set incorrectly. Adjust the sensor or, if necessary, replace it.
Mounting the sensor [
}
27]
Component part defective. Replace component or send it to SCHUNK
for repair.
Have Schunk check the application.
6.6 Torque is diminishing
Possible cause Corrective action
Compressed air can escape. Check seals, if necessary, disassemble the
product and replace seals.
Disassembling the swivel unit [ } 34]
Too much grease in the mechanical
movement space. Clean and lubricate product.
Maintenance [ } 32]
Pressure drops below minimum. Check air supply.
Pneumatic connection [ } 21]