SCHUNK SFL 25 Series, Сборка и руководство по эксплуатации

Страница: 37 / 44

Maintenance
05.00 | SFL | Assembly and operating manual | en | 389398
37
Assembling the basic modules GKM and FAN
Ø
Turn the rectangular section of the rotor (53) with the longer
side towards the center of the air connections A and B.
Ø
Position the stop (81) with the magnets (141):
- for 090 variant: One magnet points towards the 90° position
and the other one towards the 180° position.
for 180 variant: One magnet points towards the 0° position and
the other one towards the 180° position.
Ø
Put the GKM basic module onto the FAN rotor drive and tighten
it using the screws (104).
Ø
Connect the compressed air connections.
7.8 Screw and nut tightening torques
Position of the item numbers, Assembly drawings [
}
38]
Designation Tightening torque [Nm]
SFL 25 SFL 40 SFL 64
Item 101 0.7 1.2 3.1
Item 104 0.7 1.2 3.1
Item 140 0.3 1.2 4
Item 121 0.8 1.3 3.1
Item 124 0.8 1.3 3.1