SCHUNK SFL 25 Series, Сборка и руководство по эксплуатации

Страница: 33 / 44

Maintenance
05.00 | SFL | Assembly and operating manual | en | 389398
33
7.4 Replacing an elastomer for E variants
Position of the item numbers, Assembly drawings [ } 38]
The elastomers have a limited lifespan depending on the load. For
this reason, their function should be checked regularly. The
elastomer is working correctly if the unit moves gently to the end
positions.
The complete elastomer unit – consisting of stop, needle role, nut
and damping bolt – can be ordered at SCHUNK.
Ø
Remove compressed air lines.
Ø
Loosen nuts (124).
Ø
Remove stops (83).
Ø
Remove needle roles (122). If the needle roles can't be
removed, a little rod magnet or turning the swivel unit by hand
may be helpful.
Ø
Assemble the new elastomer unit in reverse order.
Ø
Adjust the end positions, Adjusting the swivel angle [
}
23].
7.5 Replacing a shock absorber for S variants
Position of the item numbers, Assembly drawings [
}
38]
The shock absorbers have a limited lifespan, depending on the
load. For this reason, their function should be checked regularly.
The elastomer is working correctly if the unit moves gently to the
end positions.
The complete shock absorber unit – consisting of shock absorber,
sleeve and nut – can be ordered at SCHUNK. When replacing it,
pay attention to the control number "-346" at the end of the
damper designation.
Ø
Remove compressed air lines.
Ø
Loosen lock nut (121).
Ø
Remove shock absorber (120).
Ø
Remove sleeves (122). If the sleeves can't be removed, a little
rod magnet or turning the swivel unit by hand my be helpful.
Ø
Assemble the new shock absorbers in reverse order.
Ø
Adjust the end positions, Adjusting the swivel angle [ } 23].