SCHUNK RCV, Сборка и руководство по эксплуатации

Страница: 28 / 44

Operation
28 02.00 | RCV | Assembly and Operating Manual | en | 1453513
6 Operation
CAUTION
Damage due to axial load!
An axial load on the tool will result in a premature failure of the
product.
•
Avoid axial loads.
•
Avoid loads running parallel to the rotary axis.
•
When deburring flat edges, make sure that the tool does not
come into contact with material underneath.
•
Adjust the infeed so that no more than 30% of the diameter of
the cutter is reached.
•
When deburring bore holes, guide the cutter in a circular path
along the edge of the bore hole. Do not carry out axial infeed
(e.g. while lowering), as this will cause an axial force.
CAUTION
Damage to the spindle due to coolant!
When using with coolant, ensure that no coolant drips onto the
spindle. Dry machining is recommended.
CAUTION
Possible damage to the tool and the tool bearing!
If the tool quickly approaches the workpiece vertically, this will
lead to an uneven machining result and premature wear of the
bearing and tool.
•
Adjust the process parameters precisely.