SCHUNK RCV, Сборка и руководство по эксплуатации

Страница: 32 / 44

Maintenance
32 02.00 | RCV | Assembly and Operating Manual | en | 1453513
8 Maintenance
CAUTION
Material damage due to incorrect assembly and disassembly!
Incorrect disassembly and reassembly may cause damage to the
product and/or accessories.
•
SCHUNK recommends having the product and/or accessories
checked and repaired by SCHUNK if necessary.
8.1 Notes
Original spare parts
Use only original spare parts of SCHUNK when replacing spare and
wear parts.
8.2 Maintenance interval
Maintenance
interval Maintenance work
daily Check cutter for damage and wear, replace if
necessary,
Changing the cutter [ } 33].
weekly Check spindle boot for damage and wear,
replace if necessary,
Changing the spindle boot [
}
34].
as required Change motor, Changing the motor [
}
35]
Change ring cylinder assembly,
Changing the ring cylinder assembly [
}
36].
Send damaged products to SCHUNK for
repair.
8.3 Lubrication of the motor
To maximize service life, only operate the motor for the product
with lubrication in the air supply. To do this, lubricate the air
supply to the motor with 1-2 drops of a standard pneumatic tool
oil per minute.