SCHUNK KGG 100, Сборка и руководство по эксплуатации

Страница: 34 / 52

Assembly
34 17.00 | KGG | Assembly and Operating Manual | en | 389166
Alternatively for size 60 – 20, 70 – 24 and 80 – 30:
Setting the sensor in "Standard mode"
NOTE
If there is no T-nut available, slide the sensor according to
dimension I1 into the groove (2),
Setting dimensions for magnetic switches [
}
24].
1. Turn the sensor 1 (1) into the groove (2).
OR: Slide the sensor 1 (1) into the groove (2) until the sensor 1
(1) stops at the T-nut (3).
2. Secure the sensor 1 (1) using the set-screw (4).
Tightening torque: 10 Ncm
3. Adjust sensor 1 (1), see sensor assembly and operating
manual.
4. Repeat steps for sensor 2.