Tablet and App
01.00|Ident-Nr. 1494155|en
48
7.4.4
Connect/disconnect tool holder
1.
Push the Button “ITN
-TH-
DEMO” then the scanning process is activated and a window with
a list of tool holders to be connected appears.
If a few seconds later no tool holder appears in the list, make sure that a Bluetooth
connection is possible.
If the tool holder still does not appear, connect it to the charger.
2.
Choose the tool holder you want to connect to.
Then you can work with this tool holder in the app and the data appear in the different
displays.
3.
Push the Button with the name of the tool holder again to disconnect.
Then the window with the list of tool holders to be connected appears again.
In the “Tool Holder” display you can change the name from the tool holder or reset your
changes to the factory settings. If you want to save your changes, you must push the save but-
ton.
Chapter 7.4.12
explains the “Tool Holder” display in more details.
