Tablet and App
01.00|Ident-Nr. 1494155|en
60
7.4.12
Tool Holder display
The Tool holder display is used to set and get information about the tool holder.
1.
This range is to change the name of the tool holder individually and to set a specific number,
the number can be seen only here
The tool holder must be disconnected, then it can be selected under the new name at the
drop-down menu.
a.
Button to save the changed settings
b.
Button to reset to factory settings, the tool holder name changed to the serial
number from the tool holder (2.c)
2.
In this range the information about the tool holder (a-c) are preset by SCHUNK and the
information about the electronic (d-f) are preset by INNIRION
a.
The name of the SCHUNK-product
b.
The SCHUNK material number
c.
The serial number of the tool holder from SCHUNK
d.
The software version from INNIRION
e.
The serial number of the electronic from INNIRION
f.
The hardware version from INNIRION
The settings in this area cannot be changed by the customer!
