SCHUNK 0322200 Скачать руководство пользователя | Manualshive

Страница: 32 / 56

background image

Maintenance

32

04.00 | FDB | Assembly and Operating Manual | en | 389072

8 Maintenance

The user is encouraged to return the unit to SCHUNK for
maintenance.

is provided to assist the user when they

choose to maintenance the FDB in the field. For all maintenance, it
is recommended that the air supply (before the solenoid valves) be
disconnected. Drain any trapped air pressure in the lines. It is
suggested that the air supply be “locked out” to prevent accidental
operation of the spindle. During maintenance operations, refer
to

Procedures for maintenance instructions. Service

and repair parts are identified in Serviceable Parts.

8.1 Recommended Spare Parts

For repair and spare parts please contact SCHUNK. Suggested user
replaceable, optional and spare parts are listed in the tables
below. All other repairs must be performed by SCHUNK:

Available spare parts

FDB-150

1/8" collet
3 mm collet
Clamping nut
Replacement motor

FDB-300/-340

Ø 3 mm collet
Ø 1/8” collet
Ø 3/16” collet
Ø 6 mm collet
Ø 1/4” collet
Clamping nut, FDB 300/ FDB 340 motor (.450 Lg. x .318 hole)
Clamping nut, FDB 300/ FDB 340 motor (.450 Lg. x .254 hole)
Spindle hose adapter, 3/8 to 5/16" [8 mm]
Spindle hose adapter, 1/2" to 5/16" [8 mm]
Replacement motor

FDB-900/1040

Ø 4 mm ER-11 collet
Ø 6 mm 1/4” ER-11 collet
Clamping nut, ER collet
Replacement motor

Recommended parts
for stocking

SCHUNK recommends stocking the following spare parts:

FDB-150

Collar
Replacement motor

«
...
30
31
32
33
34
...
»

Содержание 0322200

























































Отзывы:

Нет отзывов

Похожие инструкции для 0322200

Бренд: Ecco Страницы: 3

Бренд: Panasonic Страницы: 30

Бренд: Nektar Страницы: 3

Бренд: Eaton Страницы: 5

Бренд: Youkey Страницы: 86

Бренд: Wacker Neuson Страницы: 62

Бренд: HANYOUNG NUX Страницы: 2

Бренд: Tanco Страницы: 112

Бренд: Tar River Страницы: 61

Бренд: Zero88 Страницы: 26

Бренд: HAMOKI Страницы: 7

Бренд: H&S Страницы: 56

TOTAL KNEE 1900

Бренд: Össur Страницы: 58

Бренд: KAM Страницы: 5

So-exercise TX7

Бренд: T-SoX Страницы: 8

Бренд: GE Страницы: 241

Бренд: GE Страницы: 223

Бренд: Rigol Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды