Operation
■
Required tools:
2.5 mm and 3 mm hexagon socket wrench, torque wrench
■
Materials required:
Loctite 7649 primer and Loctite 222
1. Remove the compressed air hose.
M5 x 6 mm cheese-head screws with hexagon socket
Remove screws
2. Remove the 4 hexagon socket screws M5 x 6 mm from the
housing.
M4 x 16 mm
Button Head
Socket Cap Screws
Compliance
after Lock is
applied
3. Apply Loctite 7649 primer and Loctite 222 to the 4 hexagon
socket screws M4 x 16 mm.
4. Using a 2.5 mm hexagon socket wrench, insert the 4 hexagon
socket screws M4 x 16 mm into the threads on the housing
from which the 4 hexagon socket screws M5 x 6 mm were
removed.
Tighten the screws to 2.82 Nm.
5. Connect all compressed air lines.
23
04.00 | FDB | Assembly and Operating Manual | en | 389072