Schulze BLUEpress, Инструкция по эксплуатации

Страница: 15 / 27

4.3 Replacing the main fuse
If the heat press does not work after switching on (the main switch is glowing, but the display is not), check the main fuse of the press.
The main fuse 12A is placed in the upper part of the press
(photo 1) .To exchange the fuse, switch off the heat press first and pull the
plug . Then remove the fuse bracket (photo 2) . Exchange the fuse and tighten the fuse bracket again (photo3) .
4.4 Replacing the fuse in the power supply
The heat press is equipped with a main fuse 1,6A/12Volt, which is placed in the upper part of the press. In the power supply there is a
LED, which can be controlled through the little holes in the upper part of the press
(photo 1) .
When the LED glows, the power supply works.
If the LED doesn't blink, the fuse 1,6A in the power supply has to be exchanged.Um die Sicherung auszutauschen
.
First turn off the press and pull the plug.
Loosen the srews in the upper part of the press (photo 2) and remove the cover (photo 3) . Loosen the stopper of the power supply.
(photo 4) and remove it. Screw loose the fuse bracket (photo 5) and exchange the fuse (photo 6) . Then reassemble the press again.
Version 11.01 15