Schulze BLUEpress, Инструкция по эксплуатации

Страница: 5 / 27

1.5 Exchangeable heating plates
1
2
3
For the press there are several heating plates available.
The instruction for the exchange you can find in chapter 3.6.
1. Heating plate 40 x 50 cm
2. Heating plate 38 x 45 cm
3. Heating plate 20 x 20 cm
1.6 Exchangeable base plates
43 cm
20 cm
38 cm
1
2
3
4
5
6
For the press there are several baseplates available.
The instruction for the exchange you can find in chapter 3.7.
1. Base plate 40 x 50 cm
2. Base plate 38 x 45 cm
3. Base plate 20 x 20 cm
4. Base plate 12 x 12 cm
5. Base plate 10 x 45 cm
6. Trapezoid plate 20 x 38 x 43 cm
1.7 Safety arrangements of the heat press
The BLUEpress is equipped with different safety arrangements, to make a safe usage possible.
Main fuse 12A
The main fuse 12A is placed in the pivoting upper part of the heat press. In case of overcharge, the main fuse prevents the heat press
from getting damaged.
Once the fuse was activated, it has to be replaced. The instruction for replacing the main fuse can be found in chapter 4.3.
Fuse 1,6A
This fuse is placed in the 12VAC power supply in the upper part of the heat press. It saves the 12VAC circuit of an overcharge. Once the
fuse was activated, it has to be replaced. The instruction for the exchange you can see in chapter 4.4.
Thermal fuse
The thermal fuse is placed directly on the heating plate and it stops the power supply if the temperature exceeds 260°C. If this fuse is
activated, the temperature sinks down to 90°C. After that the power supply gets activated again and the temperature of the heating plate
rises and you can work with the press again. Certainly you need to install a new thermal fuse within the next days. The instruction for the
replacement of the thermal fuse can be found in chapter 4.7.
Emergency shut-off
In dangerous situations you may just push the red button at the front of the press. The press will open automatically. To resume your work
pull the button to you..
Automatic switch-off
If the press doesn't get opened within 10 seconds after the pressing progress, the heating element switches off automatically, to avoid fire
danger.
Version 11.01 5