Schulte FX-742, Руководство оператора

Страница: 95 / 168

OPERATION
FX-742 07/16 Operation Section 4-37
© 2016 Alamo Group Inc.
OPERA
T
ION
If a material blockage occurs in the inlet or discharge areas of the mower, SHUT DOWN
TRACTOR ENGINE, disengage the PTO and wait for all rotating motion to stop. Place the
tractor in park position, engage the parking brake and remove the key before leaving the
operator’s seat. Clear the blockage before proceeding with mowing. Be sure to keep feet
and hands clear of the mower blades. If you raise the mower or mower wing to access the
blockage, engage the wing lock up latch and securely block up the mower before placing
any parts of the body underneath the mower.
Mow only in conditions where you have clear visibility in daylight or with adequate artificial
lighting. Never mow in darkness or foggy conditions where you cannot clearly see at least
300 feet (90 m) in front and to the sides of the tractor and mower. Make sure that you can
clearly see and identify passersby, steep slopes, ditches, drop-offs, overhead obstructions,
power lines, debris and foreign objects. If you are unable to clearly see these type of items
discontinue mowing.
(SGM-1)
Avoid mowing in reverse direction when possible. Check to make sure there are no
persons behind the mower and use extreme care when maneuvering in reverse. Mow only
at a slow ground speed where you can safely operate and control the tractor and mower.
Never mow an area that you have not inspected and removed debris or foreign material.
(SGM-08)
Follow these guidelines to reduce the risk of equipment and grass fires
while operating, servicing, and repairing the Mower and Tractor:
-Equip the Tractor with a fire extinguisher in an accesible location.
-Do Not operate the Mower on a Tractor with an underframe exhaust.
-Do Not smoke or have an open flame near the Mower and Tractor.
-Do Not drive into burning debris or freshly burnt areas.
-Ensure slip clutches are properly adjusted to prevent excessive slippage and plate heating.
-Never allow clippings or debris to collect near drivelines, slip clutches, and gearboxes.
Periodically shut down the Tractor and Mower and clean clippings and collected debris from
the mower deck.
(SGM-12)