SCHOTT TITRONIC universal, Руководство по эксплуатации

Страница: 10 / 27

31
3 Setting up and commissioning
3.1 Unpacking and setting up of the TITRONIC
â
â â
â
universal Piston Burette
The TITRONIC
â
â â
â
universal Piston Burette and all its accessories are ex-works thoroughly tested for correct
functioning and dimensional accuracy and, apart from the TM 96 Stirrer, the stand rod and the manual key
button, installed ready for operation.
Please note that also all the small accessories are taken out of the packing. For the scope of delivery,
please refer to the packing list.
Set up the TITRONIC
â â â â
universal Piston Burette on any flat surface, and connect the mains plug to the
mains socket. Prior to plugging in the mains plug it has to be ensured that the operating voltage of the
TITRONIC
â â â â
universal Piston Burette matches the mains voltage. The operating voltage is indicated on the
specification plate on the bottom of the TITRONIC
â
â â
â
universal Piston Burette.
!
The piston burette is not suitable for use in explosive-hazardous environments.
!
3.2 Installation of the stirrer
The stirrer connects to the right side at the bottom and is locked in position by pushing it backwards
(
& Fig. 2). In this way the power supply of the TM 96 Stirrer is automatically established.
Fig. 2 Installation of the stirrer:
TITRONIC
â â â â
universal Piston Burette seen from below:
Fig. 3 and Fig. 4: Removing the stirrer:
Insert the stirrer from below and upwards
into the contact openings of the piston
burette, then push the TM 96 Stirrer
backwards until it latches in position.
Lift the latch slightly up, push
the stirrer forwards, and pull it
of downwards.