Seite 20 von 28
Stand 20.01.2008
Betriebsanleitung 810276-BAL-DE/EN-090120
SCHNIER
Der Partner für Elektrostatik
Menu
Switching I-flip to the left leads into the menu.
The upper line always indicates the selected
point of menu.
When switching to the left furthermore the next
point of menu will be selected.
Switching to the right will set into effect the
chosen point of menu.
Explanation of the menu points:
1
switches off device
2
returns to measuring
3
indicates the stored measuring values
4
deletes all stored values, subsequently to be confirmed by switching the
R-flip: (R-flip to the right: delete; R-flip to the left: do not delete).
5
switches off seconds counter, time will be indicated.
6
enables calibration of the device, consultation of SCHNIER is compulsory
(When switching I-flip to the left several times, this menu point may
be abandoned.)
Show memory
When active, put the I-flip to the left to get into
the menu. Switch the I-flip to the left several
t
imes until line 3 “show memory“ is selected.
Then switch I-flip to the right to reach the
register with the stored measuring values.
