Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.010
Page 9
6 Startup
Before switching on the
SCHMIDT
®
Measured Value Display MD 10.010
,
check whether the device is intact as well as installed correctly, both me-
chanically and electrically.
If the display is in the correct operational state, it is ready for operation
approx. 5 seconds after switching on the supply voltage.
Operating and display elements
Figure 4: Operating and display elements
The labels included in the delivery can be attached to the unit field to in-
dicate the desired measuring unit (e.g. m/s, m³/h ...) of the main display.
Standard mode
After a successful initialization phase, the
MD 10.010
enters its standard
operation mode as
“Measured value display” (see Figure 4).
The main display shows the actual standard measurement value, the sta-
tus of the alarm outputs are depicted in the auxiliary display (see Table 3).
Main display:
- Standard: Meas. value
- Menu:
Parameter
Auxiliary display:
- Standard: Status of
alarm outputs
- Menu:
Identification of
the selected
menu items
Arrow key up
