Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.010
Page 12
Auxiliary
display
Main
display
Description
Configuration of analog output
Analog output: Activated
Signal mode: 4 ... 20 mA
.
Start value: 1 m/s (
≙
4 mA)
.
End value: 20 m/s (
≙
20 mA)
Control panel lock: Deactivated
After the final menu item, the configuration menu is left automatically going
back to the main display.
Verification of indication values in display menu (short press of
)
Auxiliary
display
Main
display
Description
.
Actual measured value of sensor:
12.80 m/s
.
Actual raw signal value of sensor :
9.120 mA
.
Peak-value memory:
- Maximum measured value of sensor:
35.80 m/s
- Deletion of stored value by using
for approx. 5 s
.
Peak-value memory:
- Minimal measured value of sensor.
1.80 m/s
- Deletion of stored value by using
for approx. 5 s
.
Switching point of alarm output A1:
15.00 m/s
Alarm output A2: Deactivated
After the final menu item, the display menu is left automatically going back
to the main display.
