Schmidt MD 10.010, Инструкция по эксплуатации

Страница: 4 / 24

Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.010 Page 4
2 Application range
The SCHMIDT
®
LED Measured Value Display MD 10.010 (article no.:
527320 and 528240) is used to display measured values which are trans-
mitted by a sensor via an analog signal (current or voltage).
The supply voltage of the sensor can be obtained from the LED display.
Switching points for two alarm outputs can also be derived from the input
signal. The galvanically isolated analog output allows the scalable output
of the display values.
The SCHMIDT
®
LED Measured Value Display MD 10.010 can be used
for SCHMIDT
®
flow sensors as well as for other sensors (e.g. pressure,
temperature, humidity) which are equipped with standard analog outputs.
The SCHMIDT
®
LED Measured Value Display MD 10.010 is designed
for the use inside closed rooms and is not suitable for outdoor use (risk of
condensation on electronic parts). Moreover, the use in safety relevant
applications is not allowed.
3 Mounting instructions
Dimensions
Figure 1: Dimensions of housing
13
4
10
6
100
90
10
0
90
60
27
30
6,3
4,9
max. 120
6.3
4.9