Instructions for Use
– SCHMIDT
®
LED Measured Value Display MD 10.010
Page 14
Auxiliary
display
Main
display
Description
.
Switching hysteresis: 10 m³/h
(relay declines in case of a decrease below 140 m
3
/h)
.
.
Response delay: 30 s
.
.
Release delay: 30 s
Configuration of alarm output 2
Alarm output: Deactivated
Configuration of analog output
Analog output: Activated
Signal mode: 4 ... 20 mA
.
Start value: 0 m³/h (
≙
4 mA)
.
End value: 200 m³/h (
≙
20 mA)
Control panel lock: Deactivated
After the final menu item, the configuration menu is left automatically going
back to the main display.
Verification of indication value on display menu (short press of
)
Auxiliary
display
Main
display
Description
.
Actual measured value of sensor:
120.8 m³/h
.
Actual raw signal of sensor:
9.635 mA
.
Peak-value memory:
- Maximum measured value of sensor:
305.0 m³/h
- Deletion of stored value by using
for approx. 5 s
.
Peak-value memory:
- Minimum measured value of sensor: 1
0.7 m³/h
- Deletion of stored value by using
for approx. 5 s
.
Switching point of alarm output A1:
150.0 m
3
/h
Alarm output A2: Deactivated
After the final menu item, the display menu is left automatically going back
to the main display.