Schmidt
Mess- und Regeltechnik
©2014 Schmidt
Mess- und Regeltechnik
Fon 0 67 32 - 91 91 20 Fax 0 67 32 - 96 24 42 [email protected]
5
5.
Calibration data
Calibration data, type of device and serial number are indicated on the label. Changes of
medium, pressure and position of mounting will lead to measured value changes.
6.
Switch-point
Type DW-P
The switch-point is fixed by the manufacturer according to
customer’s request. Changes can only be maid by the supplier.
Type DW-N, DW-N-EX
Alternations/Adjustability of the switch-point can be made by the
customer
within the limits indicated on the small scale attached on the
backside.
Type DW-U, DW-U-EX
Alternations/Adjustability of the switch-point can be made by the
customer
within the limits indicated on the small scale attached on the
backside.
The actual flow is indicated on the large round scale at the front
of the unit.
7.
Maintenance
The Paddle Flow Switch / Flow Meter DW-U are virtually maintenance free. In case of mal-
function first of all check the pipe system for calcification or contaminations.
For cleaning do not use sharp-edged tools and proceed with extreme caution. Damaged
instruments should be sent in for repair, as they have to be re-calibrated by the manufacturer.
Adjustments of set screws or after for instance replacement of the tension spring or
of the bellows system by the customer cause a change of the calibration.
All guarantee and warranty claims are forfeited hereby.
8.
Further requirements for device with EX-switch
The measures specified here must always be applied according to valid technical rules.
Operation Manual
Flowmeter / Flow Control DW-U
Flow monitor after the baffle plate principle for liquids
