schmersal PSC1-C-10 Series, Руководство по установке

Страница: 67 / 173

Installation manual
PSC1-C-10 Installation manual V2.6 Page 67 of 173
Version: 57E
4.3.4 Digital outputs
The modules
•
PSC1-C-10, PSC1-C-10-SDM1, PSC1-C-10-SDM2
•
PSC1-E-31-..., PSC1-E-33-..., PSC1-E-37-...
each have identical outputs.
4.3.4.1 Characteristic data of the basic outputs
The PSC1 series provides different types of outputs that can be connected together either separately
or in groups.
Output Architecture according
to EN ISO 13849-1 Remark
Combination
of 2 relays Q4
– Q5
4 Complete shutdown channel corresponding
to architecture category 4 according to EN
ISO 13849-1
Q4,Q5,
Qx.0.y-Qx.3.y Not safe Only functional
Q0_P and
Q1_N 4 Complete shutdown channel corresponding
to architecture category 4 according to EN
ISO 13849-1
Q0_P Not safe Only functional
Q1_N Not safe Only functional
Q2_P and
Q3_N 4 Complete shutdown channel corresponding
to architecture category 4 according to EN
ISO 13849-1
Q2_P Not safe Only functional
Q3_N Not safe Only functional
Q0 – Q3 4 Complete shutdown channel corresponding
to architecture category 4 according to EN
ISO 13849-1
Y0 Not safe Signal output
Y1 Not safe Signal output
The Qx_PP, Qx_PN and Q0-Q3 outputs are subjected to a plausibility test in all operating states. In the
switched in state, all outputs are tested for correct function using a cyclic test pulse. For this purpose,
the output is switched to the corresponding inverse value for a test duration TT < 300 µs as a
maximum, i.e. a P output is briefly switched to 0 VDC potential and an M output is briefly switched to
24 VDC potential.
The relay outputs are monitored for plausibility during each switching operation. The relay outputs
must be switched cyclically and therefore tested to retain the safety function. The switching/test cycle
is to be defined dependent on the application.
Note:
When using PSC1-E-33 module please observe note in section 5.6.5.