Schmeiser 3-Point Hitch Category 1 & 2, Руководство по эксплуатации и запасным частям

Страница: 6 / 28

Till An’ Pak™
www.tgschmeiser.com 6 Ph. (559) 268-8128
Fax (559) 268-3279
Do not use or transport the unit until you
read and understand the information
contained in this manual.
WARNING
Safety precautions and warnings are
provided in this manual and on the unit . If
these hazard warnings are not heeded,
bodily injury or death could occur to you or
to other persons .
The safe operation of any implement is an important
concern to farmers and manufacturers. Safety of the
operator and bystanders is one of the main concerns in
designing and developing a new implement. There are
obvious and hidden potential hazards involved in the
operation of this implement. Carefully read and follow
all safety precautions before operation. Serious injury
or death may occur unless care is taken to ensure the
safety of both the operator and any other persons in the
area. Avoid potential danger by taking extra time for
thought and a more careful approach to the use of this
implement.
Most work related accidents are caused by failure to
observe basic safety rules or precautions. An accident
can often be avoided by recognizing potentially
hazardous situations before an accident occurs. As
you assemble, operate, or maintain the unit, you must
be alert to potential hazards. You should also have
the necessary training, skills, and tools to perform any
assembly or maintenance procedures.
Improper operation and maintenance of this unit could
result in a dangerous situation that could cause injury or
death.
T.G. Schmeiser cannot anticipate every possible
circumstance that might involve a potential hazard. The
warnings in this manual and on the product are,
therefore, not all-inclusive. If a method of operation not
specifically recommended by us is used, you must
satisfy yourself that it is safe for you and for others. You
should also ensure that the unit will not be damaged or
be made unsafe by the methods that you choose.
The information, specifications, and illustrations in this
manual are based on the information that was available
at the time this material was written and are subject to
change without notice.
Safety Alert Symbols
This is the safety alert symbol. It is used to
alert you to potential personal injury
hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
This manual contains DANGERS, SAFETY
INSTRUCTIONS, CAUTIONS, IMPORTANT NOTICES,
and NOTES which must be followed to prevent the
possibility of improper service, damage to the equipment,
personal injury, or death. The following key words call the
readers attention to potential hazards.
Hazards are identified by the “Safety Alert Symbol” and
followed by a signal word such as “DANGER”,
“WARNING”, or “CAUTION”.
DANGER
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury .
This signal word is limited to the most extreme
situations .
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury .
CAUTION
Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
Indicates that equipment or property damage can
result if instructions are not followed.
NOTICE
Safety instructions (or equivalent) signs indicate
specific safety-related instructions or procedures.
SAFETY INSTRUCTIONS
Note : Contains additional information important to a
procedure.
SAFETY
WARNING