Schmeiser 3-Point Hitch Category 1 & 2, Руководство по эксплуатации и запасным частям

Страница: 16 / 28

Till An’ Pak™
www.tgschmeiser.com 16 Ph. (559) 268-8128
Fax (559) 268-3279
Hours and Serviced By
Maintenance
Before Each Use or Daily
Ensure that all fasteners are tight, and all pins are secured
in place.
Inspect the frame for structural fractures.
Make sure all warning decals are in place and legible.
Check all rings for wear and damage. Replace if
necessary.
Every 50 Hours or Weekly
Perform the Daily Maintenance schedule.
Lubricate zerk fittings on roller pillow block bearings with a
good general purpose grease.
Every 1000 Hours or Annually
Perform the Daily Maintenance schedule.
Perform the Weekly Maintenance schedule.
Lubricate zerk fittings on roller pillow block bearings with a
good general purpose grease.
Remove debris and clean the entire implement with
compressed air or a pressure washer.
Remove rust and apply a coat of paint to frame surfaces
where the paint has been worn off or damaged.
Maintenance Schedule
The period recommended is based on normal operating conditions. Severe or unusual conditions may require more
frequent service.
MAINTENANCE
WARNING
Understand Safety Procedures!
Read and understand all safety procedures
described in this manual before performing any work
on or around the implement.